Push-to-open drawer slides AxisPro are a modern solution for all types of furniture. They can be installed in kitchens, bathrooms, or wardrobes. They are characterized by a full extension, which means maximum accessibility to the contents of the drawer. The sides of the drawer are only 14 mm thick, so the efficiency is maximum. Another advantage of AxisPro drawer slides is that the screws for adjusting the front are from the inside of the side, which allows you to adjust the front pieces even if the drawer cabinet is against the wall. At the same time, the sides are completely smooth from the outside. The sides are of high quality, white lacquered.

AxisPro PUSH drawer slides are intended for drawers with touch opening / without handles.

Length: 300mm | 350mm | 400mm | 450mm | 500mm

Side height: 86mm

Load capacity: 35 kg

AxisPro railings can be used as an upgrade. You can reach them by CLICKING HERE.

Minimum required height inside the cabinet: 115mm

To assemble the AxisPro drawer, you need, a bottom and back panel, 16mm thick.

Calculation of the bottom panel

The bottom of the drawer should be 24mm shorter than the nominal length of the drawer.

Example: Length 500mm -24mm = 476mm.

The bottom of the drawer should be 75 mm narrower than the inner width of the drawer cabinet.

Example: 564mm – 75mm = 489mm.

Calculation of the back panel for the drawer assembly.

The back side should be 87mm shorter than the inner width of the cabinet.

Example: 564mm – 87mm = 477mm.

The height of the back panel should be 84mm, or whatever you want in the case of using railings.

To upgrade the drawer with railings, you don’t need additional, railing brackets, as these are attached to the back panel by screws.

Price includes 2x guide, 2x side, 2x cheek mount, 2x screw cap, and 2x back mount.