Closet sliding doors hardware EURO is intended for the installation of the closet doors in the element (cabinet) or on the floor (laminate, parquet, ceramics,…) and the ceiling of the room.

The floor guide can be mounted to the floor with double-sided adhesive tape, and the upper guide can be attached to the ceiling with screws. The weight of the door is carried by the lower wheels, so the ceiling can also be made from plasterboard.

This sliding door hardware system allows the floor and ceiling in the room are not completely parallel and have a tolerance of up to 15mm.

The sliding door hardware set contains:

1x bottom guide 2 meters. (2000mm x 52mm x 12mm)

1x top guide 2 meters. (2000mm x 77mm x 38mm)

2x set of wheels for 2 sliding doors (4x bottom wheel and 4x top wheel)

The load capacity of 1 set: 50 kg

** The door height should be 46mm smaller than the opening – from floor to ceiling. **

Color: Black Matte

Guides material: Aluminum

A soft closing damper can be installed on the sliding door for greater comfort. The shock absorber is not part of the set and is purchased separately.

If the sliding door is 1500mm or higher, we recommend profile handles along the door height, otherwise, doors may band.

If necessary, you can attach additional sliding doors to the rails. It is only necessary to purchase an additional set of EURO+ wheels.

For optimal operation of the EURO system, the door height must be 45mm lower than the opening.