LED strip sensor switch and dimmer is a practical (IR) switch installed between the power supply and the LED strip or any other LED light. It allows you to turn the LED strip or light on and off and adjust its brightness. The IR sensor switch can be installed into the panel of a cabinet (18mm or thicker), allowing the light to turn on or off automatically when the door is opened or closed. Alternatively, it can be mounted on the furniture’s surface. Holding your hand in front of the sensor will increase or decrease the brightness. The IR sensor operates within a range of approximately 5 cm.

This LED strip Sensor switch is suitable for installation in furniture side panels. Installation requires a drilled hole with a diameter of 15 mm and a depth of 53 mm. The sensor switch comes with two cables, each 2 meters long, equipped with miniAMP connectors, so the sensor can be easily connected to a power supply and LED strip.

IR sensor switches are ideal for installation in drawer units, kitchen cabinets, display cabinets, bathroom cabinets, wardrobes, showcases, and other furniture.

12V – Max 24W

24V – Max 48W

Color: White

Protection rating: IP20 (dry areas)

Important: The sensor’s power rating must exceed the power consumption of your lighting fixture. For example, if you have a 4-meter LED strip consuming 10W per meter (totaling 40W), you must use a sensor with a rated capacity of 48W.