Drawer Slides Axis Pro Glass is a drawer system with glass sides. All you need is a 16mm thick, custom-cut bottom panel, back panel, and front of the drawer and you will be able to assemble a drawer for your kitchen or wardrobe. Elegance is provided by the straight black lines of the hardware and tempered dark glass. The glass is 8 mm thick, so the drawers are also suitable for the kitchen, where we work with metal pots and pans.

Quality drawer slides are tested for 60,000 cycles and have a load capacity of up to 40 kg. Built-in soft close damper ensures the comfort of use.

The assembly and installation of the Axis Pro drawer system is effortless. Watch the video below. The assembly process is the same as that of other Axis Pro systems. For the dimensions of the bottom and back panel use the formula in photo 7 or follow this formula; the bottom must be 24mm shorter than the nominal length of the drawer (500-24mm= 476mm). The bottom must be 75 mm narrower than the inner width of the element. Back panel height A = 84mm or C = 167mm. The width of the back side must be 87mm narrower than the inner width of the cabinet.

The depth of the cabinet must be at least 10mm deeper than the nominal length of the drawer (500+10 =510mm).

The front panel can be adjusted with screws which are hidden on the inside of the drawer.

Length of the slides: 500mm

Side heights: A – 84mm | C – 167mm

Side thickness: 14mm

Glass thickness: 8mm

Extension: Full extension

The set contains: 2x slides, 2 sides, 2x back panel brackets, 2x front brackets, and 2x screw caps.

Material: steel – sheet metal, glass, plastic