LED lights Virgo, are extremely efficient and versatile. They can be used in practically any location within your home, as they work without wiring. They have a built-in, powerful 3000mAh battery that provides light from 5 to 80 hours, depending on the brightness selection (20-100%). They are most often used in the kitchen, under cabinets, on the staircase, in the pantry, hallway, bathroom, or inside furniture.

Easy Installation

Because LED lights Virgo are battery-powered, there is no need to run cables through the walls. They are very easy to install. Each light comes with two sheets of metal, which are equipped with double-sided adhesive tape for sticking to the wall or furniture. They can also be screwed on. Virgo lights have 2 magnets built into the housing that adhere well to metal sheets. The built-in magnets inside the light also allow it to be attached to a refrigerator, washing machine, computer, or other metal housing.

Easy charging

Quick attachment and removal of the light allow for use in multiple locations and easy charging. A powerful lithium battery (3000mAh) allows for long use without recharging. There is a battery level indicator on the light body. When it is empty, remove the light from the brackets and connect it to the included USB-C cable. It can also be connected to a phone charger.

Strong Sensor

LED lights Virgo feature a very sensitive motion sensor that covers an angle of up to 120 degrees. Good sensor sensitivity is essential when walking into the kitchen or bathroom in the middle of the night. The sensor has a range of up to 3 meters.

Brightness Adjustment

These LED lights have five brightness settings (10%, 25%, 50%, 75%, 100%). The maximum brightness is 180 lumens per Watt. The lowest setting (20%) is ideal for moving around the apartment at night. The brightness button can be set in two ways. The first is to move the brightness levels from 10-100% with short presses, and the second is to hold the button and increase or decrease the brightness. (see image 3)

Quality Built

The light housing is made of aluminum and plastic. The slim, modern design is completely unobtrusive and fits nicely in any space of your home. The Virgo LED light is only 9 millimeters thick.

Fast Installation

Installation time is less than 3 minutes, no electrician required. LED lights Virgo can be installed in less than 3 minutes, without an electrician. The included metal plates are placed on the light, where the magnet inside the light holds them in place. Then place the light where you want it to be and press so the adhesive tape adheres to the surface. That’s it.

Dimensions: 318x40x9mm

Functions: OFF/ON or sensor switch

Charging port: USB-C

Power: 4W

Light color/temperature: 4000K

Brightness: 180 lumens/Watt

Brightness levels: 10%, 25%, 50%, 75%, 100%

Material: Aluminum, plastic

Charging time: 3-4 hours

Operating time – sensor switch: 30 seconds

Weight: 145g

Price is for 2 pieces